How To Use the Haakaa Supplemental Silicone Feeding Tube Set:

1. Insert both the inlet and outlet tubes into ends of the tube adapter. Thread the end of the outlet tube through the flow controller.
2. Push the thick inlet tube down through the X-shaped opening on the Variable Flow Nipple and pull it through until it is long enough to reach the milk in the bottle. Attach the nipple to the bottle.
3. Place the end of the thin outlet tube 1-2cm away from your nipple and secure its position with medical tape.
4. Introduce your baby to your nipple and then place the thin outlet tube gently into their mouth to begin feeding.
5. Squeeze the Gen. 3 Silicone Baby Bottle body to control the flow of milk. Increase pressure on the bottle to increase the speed that milk flows or reduce pressure to slow it down. You can also use the flow controller to manager the speed that milk flows, adjusting to suit your child.

Top Tip: The Haakaa Supplemental Silicone Feeding Tube Set can be used with any baby bottle, as long as it is fitted with an X-shaped variable flow teat. Simply place the bottle above the end of the tube that is taped to your breast and let gravity do the work as your milk flows through the tube.

Clean after each use. Use the included cleaning brush to scrub the inside of the tube before rinsing with hot water. For easier operation, feed the brush through the tube by the handle and pull through. To clean the smaller tube, fill the bottle with hot, soapy water directly after feeding and continuously flush the hot water through the tube to clear out any remaining milk.

We strongly recommend cleaning and sterilising this product with any steam sterilising system. Do not use any bleach-based agents or sterilising tablets to clean this product. Do not use a UV steriliser to clean this product as it may impact its lifespan. To clean the flow controller, wash with warm soapy water.

Check product condition before each use. Immediately discontinue use and replace if this product shows any signs of damage. Do not store near any sharp objects. While it may be compatible with other X-shaped teats, we recommend only using this product with a Haakaa Gen. 3 Variable Flow Nipple. Smaller teats may tear when inserting the tube. Only soft bristle brushes or soft sponges should be used to clean this product, as hard scourers may scratch the surface. Exposure to detergent may make the silicone in this product appear cloudy. This product is not a toy. Do not use this product for anything other than its intended use. Store product in a cool, dry place and avoid direct sunlight. Adult supervision is required. 

Note: We recommend visiting a breastfeeding or medical specialist if you have any concerns with breastfeeding and feel this product could be of assistance to you and your baby. 

Supplemental Feeding Combo

Features

• Feeding tube made with food grade silicone.
• Flow controller provides a consistent flow of liquid.
• Provides added nutrition to the baby, while also giving mum and baby the sensation of breastfeeding.
• Long and slim tube for inconspicuous and discreet use.
• Baby bottle made of food grade silicone with great anti-impact performance.
• Soft, naturally-shaped silicone nipple designed to closely mimic breastfeeding.
• Multifunctional design, compatible with Gen. 3 attachments.
• Ultra-wide neck design allows for easy cleaning.
• BPA, PVC and phthalate-free. 

Write a review